Patek Philippe Ref. 5470P Replica, Patek Philippe Replica, Patek Philippe Replica Watches, Replica Watches

Patek Philippe ref. 5470P 1/10th Second Monopusher Chronograph

Cheap Patek Philippe Replica has dropped an unexpected technical bombshell – the ref. 5470P – its first-ever 1/10th second single-pusher chronograph that measures and displays 1/10th of a second with a new 5Hz movement.Importantly, not only is the new reference a high-frequency chronograph with a resolution of 1/10th of a second, it is also a high-performance chronograph that is packed with solutions to address the shortcomings inherent in a horizontally coupled mechanism and is further bolstered by the full suite of Patek Philippe’s Advanced Research department most cutting-edge innovations.

CH 29-535 PS 1/10 Movement

It is characterized by highly traditional architecture – manually wound, column-wheel control, horizontally coupled. Most notably, the Patek Philippe Replica Men Watches calibre CH 29-535 PS features an instantaneously jumping minute counter thanks to a patented perforated minute cam with a slot at the end, a skeletonized lever and a coiled spring to advance the minute counter instantaneously.

However, to achieve a precision of 1/10th second, greater torque was required to increase balance power. But rather than installing a second barrel or doubling its thickness, both of which increase the size of the movement, Copy Patek Philippe Watches instead reduced the diameter of the barrel arbor, thereby increasing the coils of the mainspring.

The CH 29-535 PS 1/10 movement comprises of two separate chronograph mechanisms so as to display both the seconds and stopped tenths of a second. As such, a 1/10th second mechanism was added to the existing chronograph mechanism. As a recap, in a standard horizontally coupled chronograph mechanism, a wheel that is mounted on the pivot of the fourth wheel drives an intermediate clutch wheel.

When the Best Patek Philippe Replica is engaged, an intermediate lever shifts the clutch wheel horizontally until it meshes with the chronograph seconds wheel, causing the seconds counter to start ticking. In the CH 29-535 PS 1/10 movement, it is the drive wheel on the original chronograph that powers the 1/10th second mechanism. In other words, both chronograph mechanisms are driven off the fourth wheel.

As with a traditional chronograph, this drive wheel is in constant contact with a clutch wheel, which is characterized by serpentine spokes. When the chronograph is activated, the clutch wheel pivots to engage a pinion in the middle. With a diameter of just 1.469 mm, this pinion was micro-toothed with 136 teeth, making one revolution in 12 seconds.

A Patented Concentric Display

The Patek Philippe Replica Swiss Movement Calibre CH 29-535 PS 1/10 is housed in a Calatrava case made of platinum, as denoted by a diamond set into the case band at six o’clock. It measures 41 mm wide but, remarkably, just 13.68 mm high. It is paired with a blue lacquered dial that displays both the chronograph seconds and 1/10th seconds concentrically, with an outer 12-sector railway track scale subdivided into tenths.The chronograph elapsed seconds is indicated by a rhodium steel hand, while the 1/10th seconds is indicated by a lacquered red hand made of Silinvar to reduce inertia.